WILLIAM I has 1 Photos
Locations
Can a luxury charter yacht survive ...
When it comes to someone’s first holiday on the ...Similar Yachts
INVICTUS | From US$ 80,000/wk
Palmer JohnsonWILLIAM I Teledyne Sewart Seacraft
If you have any questions about the WILLIAM I information page below please contact us.
A Summary of Motor Yacht WILLIAM I
The motor yacht WILLIAM I is a 31 metre 102 (ft) well proportioned aluminium luxury yacht which was produced by Teledyne Sewart Seacraft and concieved by Don O'keeffe. This gracious boat was brought about from naval architects Don O'keeffe.
Building & Design of Luxury Yacht WILLIAM I
Don O'keeffe was the naval architect involved in the formal nautical composition for WILLIAM I. Don O'keeffe is also associated with the yacht general design work for this boat. Created at Teledyne Sewart Seacraft the yacht was completed in the known yacht building country the United States. She was officially launched in Berwick La in 1975 before being transferred to the owner. A reasonable area is achieved with a total beam (width) of 6.1 metres / 20 feet. With a 1.58m (5.2ft) draught (maximum depth) she is reasonably shallow. The material aluminium was used in the building of the hull of the motor yacht. Her superstructure above deck is built with the use of aluminium. In 1980 extra refit work and updating was also performed.
M/Y WILLIAM I Engine Room / Speed:
WILLIAM I is propelled by twin screw propellers. Her total HP is 1050 HP and her total Kilowatts are 773.
A List of the Specifications of the WILLIAM I:
| Superyacht Name: | Motor Yacht WILLIAM I |
|---|---|
| Ex: | Winks Viii |
| Built By: | Teledyne Sewart Seacraft |
| Built in: | Berwick La, United States |
| Launched in: | 1975 |
| Refitted in: | 1980 |
| Length Overall: | 31.08 metres / 102 feet. |
| Waterline Length: | 25.09 (82.3 ft) |
| Naval Architecture: | Don O'keeffe, Don O'keeffe |
| Gross Tonnes: | 150 |
| Nett Tonnes: | 115 |
| Hull / Superstructure Construction Material: | aluminium / aluminium |
| Owner of WILLIAM I: | Unknown |
| WILLIAM I available for luxury yacht charters: | - |
| Is the yacht for sale: | - |
| Helicopter Landing Pad: | No |
| Material Used For Deck: | teak |
| The Country the Yacht is Flagged in: | United States |
| Official registry port is: | Wilmington De |
| Home port: | Florida, USA |
| Her Engine(s) is two 525 HP or 386 kW GM. The Model type is 12V 71N diesel. | |
| Giving the combined power of 1050 HP /773 KW. | |
| Fresh water: | unknown. |
| Yacht Beam: | 6.1m/20ft. |
| Waterline Length (LWL): | 25.09m/82.3ft. |
| Draught Maximum: | 1.58m/5.2ft. |
Further Information On The Yacht
This motor yacht has a teak deck.
WILLIAM I Disclaimer:
The luxury yacht WILLIAM I displayed on this page is merely informational and she is not necessarily available for yacht charter or for sale, nor is she represented or marketed in anyway by CharterWorld. This web page and the superyacht information contained herein is not contractual. All yacht specifications and informations are displayed in good faith but CharterWorld does not warrant or assume any legal liability or responsibility for the current accuracy, completeness, validity, or usefulness of any superyacht information and/or images displayed. All boat information is subject to change without prior notice and may not be current.
