Classic YD63A and composite YD63B yacht tenders by the New Zealand shipyard Yachting Developments are built to the highest possible quality standard, striking in appearance yet practical to use and maintain. YD63A and YD63B superyacht tenders are perfectly fit for purpose in elegantly transporting the owner and guests from a very large Superyacht to shore. Naval Architects Langan Design Associates developed their hull shape and overall styling.
YD63A Yacht Tender
YD63A
Engine installation is impressive, presented as a show piece in polished stainless steel and chrome. Care has been taken to ensure ease of access and serviceability while the vessel is in use.
YD63A yacht tender´s construction is timber, cold moulded, triple diagonally planked New Zealand Kauri with Mahogany exterior planking on the zero axis. Epoxy resin system is used throughout construction.
Yacht YD63A´s interior and exterior is clear finished. Integral fore and aft lifting points are designed and built into the structure enabling the crew to quickly retrieve and stow the vessel.
YD63B Yacht Tender
YD63B
A sistership constructed in composite, YD63B yacht tender, featuring a centre console configuration was built by Yachting Developments for the same client.
Engine installation of the YD63B yacht is impressive, presented as a show piece in polished stainless steel and chrome. Care has been taken to ensure ease of access and serviceability while the vessel is in use.
YD63B yacht´s structure is epoxy hand laid multi axial high strength foam cored sandwich. Hull exterior is high gloss painted finish incorporating clear finished inlaid mahogany timber boot top.
Integral fore and aft lifting points are designed and built into the structure enabling the crew to quickly retrieve and stow the vessel.
Technical Specifications of the Yachting Developments Classic YD63A Yacht Tender:
Designer Langan Design Associates
LOA 7.05m 23.1ft
LWL 5.60m 18.4ft
Beam 2.40m 7.9ft
Draft 0.47m 1.5ft
Displacement 2,170kg 4,784lbs
Fuel Tankage 200ltrs Stainless Steel/53 US Gal
Lifting Points 1 x Forward 1 x Aft
Engine Yanmar Diesel 4LHA-STP/240hp @3300rpm
Propulsion Ultrajet 250 Water Jet
Construction Cold Moulded Timber/Epoxy
Bow Thruster 12 volt Sidepower
Exterior Hardware Custom Yachting Developments
Technical Specifications of the Yachting Development Composite YD63B Yacht Tender:
Designer Langan Design Associates
LOA 7.05m 23.1ft
LWL 5.60m 18.4ft
Beam 2.40m 7.9ft
Draft 0.47m 1.5ft
Displacement 2,170kg 4,784lbs
Fuel Tankage 200ltrs Stainless Steel 53 US Gal
Lifting Points 1 x Forward/1 x Aft
Engine Yanmar Diesel 4LHA-STP/240hp @3300rpm
Propulsion Ultrajet 250 Water Jet
Construction Hand Laid Epoxy
Eglass Multi Axial Foam Sandwich
Bow Thruster 12 volt Sidepower
Exterior Hardware Custom Yachting Developments
